Marine LED Beacons  Marine LED Beacons



Lantern Specification

Light source High intensity LEDs.(with secondary lens)
Light Colour White, Green, Red or Yellow.
Programing Any character cab be preset as required.
LEDs Service life > 60,000 hours.
Optical system 200 mm dia Polystyrene diffuser lens.
Lantern body High impact polystyrene,sealed to IP65 standard.
Cable entry M16 Cable glands fitted.
Fixing 4 holes for M10 bolts at 200 mm PCD.

PLC-12 Programable LED Controller(Fitted inside each Lantern)

Input Voltage 12V to 24V d.c. Supply
Output Voltage Switch-mode stabilised to suit LED operating current.
Programming Any of the 256 IALA characters can be selected through 2x16 way sel.switches except MLB 200-3
Light control Automatic ON / OFF .
Charge controller Provided in the PLC-12
Protection Against reverse polarity, over Voltage, and short circuit
Temp. range -20oC to +60oC


 Marine LED Beacons   Solar Power Supply



  • The lantern, solar panels and SMF battery are mounted on a GRP box, except MLB 200-2 all assembled and wired as one “self-contained unit” ready for fitting on top of buoy superstructure.
  • For On-Shore application, Solar Panel shall be fitted on a light pole, facing south except MLB-200-2


TYPE Range (T=.74) LED Load Solar Panel for off shore Solar panel for on shore Battery Autonomy
MLB-2002 >2.0 n.miles 12V 0.3 Amp 1 No. 12V 5W 1 No. 12V 5W 12V 7AH 21 days
MLB-2004 >4.0 n.miles 12V 0.6 Amp 4 No. 12V 5W 1 No. 12V 15W 12V 26AH 21 days